Quantity: | |
---|---|
Automatic bottle rinsing machine
Introduction :
ZCP12 is my factory in the digestion and absorption of advanced technology at home and abroad on the basis of their own design and development of a new automatic spraying equipment. This equipment is suitable for the production of plastic bottled drinks, pharmaceuticals, such as mineral water, Coca-Cola, Sprite and other manufacturers to use, and in the filling system supporting the composition of automatic production lines can also be stand-alone use. ZCP12-type cleaning process is reasonable, the transmission system uses mechanical transmission, so the equipment is compact, small power, smooth operation, low noise, easy operation and maintenance, cleaning glass is the best equipment. Compared with other manufacturers of similar products, it has the following advantages:
1. Washing machine station (with 12 stations), to ensure that the bottle rinse, drop net.
2. The use of open bottle clip, to ensure that the bottle in the running process more stable and more reliable, to adapt to the requirements of high-speed operation of the machine.
Main parameters
Bottle height | 160-310mm |
Speed | <=2400bph |
Adjustable motor | 0.75kw 125-1250r/min |
Whole power | 1.12kw |
Weight | 600kg |
Dimension | 1100*1100*1800mm |
Automatic glass bottle filling machine for wine ,fruit wine
BG12 glass bottle filling machine is based on the needs of customers with my plant over the years the experience of the production of filling machine developed, mainly for glass bottled material filling.
Equipment composition
The machine is divided into four main parts:
Filling machine
workbench and drive
electrical parts
Pipes and so on
Run
Filling the product, the cleaning agent through the respective feed pipe and material distribution pipe inlet to the filling equipment.
The empty bottle is sent to the filling machine by the feed trape through the bottle screw into the bottle star wheel. During the rotation process, the bottle is pressed into the bottle and the valve pre-cover device, and the filling valve is pressed into the bottle. The No bottle is not filling.
After filling, through the filling machine out of the bottle wheel to the bottle conveyor belt, into the next process.
transmission
The main drive uses worm gear deceleration, stepless frequency adjustment motor drive.
Main parameters:
Filling heads | 12 |
Capacity | 2000bph 500ml |
Working voltage | 380v |
Drive Power | 1.5kw |
Dimension | 1150*1150*2200mm |
Weight | 800kgs |
Punching machine
The equipment is suitable for a variety of glass cork stopper, widely applicable to the wine, fruit wineries. The machine is equipped with automatic production line with, for the completion of the cork into the sealing. Automatic bottle up and down, without manual operation, save manpower.
Main parameters:
Speed | 1200-2400bph |
Bottle size | Φ50-110mm h=250-400mm |
Cap mouth size | Φ18-40mm |
Power | 1.5kw speed stepless |
Dimension | 900*1000*1900mm |
Weight | 200kgs |