Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes.
Features of main body:
Features
1). Stable performance with advanced PLC.
2). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
3). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
4). Introduce air cylinder to avoid contamination and noise.
5). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
6). Strong clamping force with high pressure and double crank links to lock the mould.
7). Two ways of operating: automatic and manual.
8). Safe、reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
9). Low cost、high efficiency、easy operation and maintenance etc, profited from the fully automatic technological process.
10). Ideal cooling system make the finished bottles without any flaws.
11). Easy for you to install、test and start up.
Productivity | Depend on bottle design | 1000-1500PCS/H |
Product type | Body diameter | <220mm |
Height | <430mm | |
Neck diameter | 40mm-55mm | |
Mold | Cavity | 3cavities |
Mold thick | 300mm | |
Mold | 300*450*800mm | |
Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ |
Power | 117kw | |
Really use power | 70kw | |
Air source | HP air compressor | 4.8m3/min 3.0MPa |
Air dryer | 5.0m3/min 3.0MPa | |
Cooling water | Cooling water | 25L/min |
Size | L*W*H | 3100*2250*2050mm |
Weight | 3000kg | |
Auxiliary equipment(pre-form unscrambler) | L*W*H | 2000*950*2480mm |
Weight | 250kg | |
Resin available | PET |