Zhangjiagang glory machinery co.,ltd
automatic red wine glass bottle rinsing machine
Share this:

automatic red wine glass bottle rinsing machine automatic red wine glass bottle rinsing machine

this machine for rinsing glass bottle automatically

  • Model: ZCP-12
  • Brand: GM
  • Code: 8422
  • Product Description

Automatic bottle rinsing machine

Introduction :

ZCP12 is my factory in the digestion and absorption of advanced technology at home and abroad on the basis of their own design and development of a new automatic spraying equipment. This equipment is suitable for the production of plastic bottled drinks, pharmaceuticals, such as mineral water, Coca-Cola, Sprite and other manufacturers to use, and in the filling system supporting the composition of automatic production lines can also be stand-alone use. ZCP12-type cleaning process is reasonable, the transmission system uses mechanical transmission, so the equipment is compact, small power, smooth operation, low noise, easy operation and maintenance, cleaning glass is the best equipment. Compared with other manufacturers of similar products, it has the following advantages:

1. Washing machine station (with 12 stations), to ensure that the bottle rinse, drop net.

2. The use of open bottle clip, to ensure that the bottle in the running process more stable and more reliable, to adapt to the requirements of high-speed operation of the machine.

Main parameters

Bottle height




Adjustable motor

0.75kw 125-1250r/min

Whole power






working principle

The bottle will be sent to the conveyor belt, automatically into the bottle, the bottle along the cam flip 180ο bottle down, rinse the bottle inside and outside, and then bottle bottle 180½ bottle bottle up automatically bottle, transported to the filling machine for filling.

Main structure

By the table, transmission parts, including speed motor, booster pump, tray, cam, clamping mechanism, such as the wheel.


 Equipment will be after the first check the various parts of the fasteners, if loose off should be fastened, and then turn on the power to gradually start to observe the movement of the site, whether the normal impact and rubbing phenomenon, whether the flushing in the bottle The middle part of the operation to confirm the normal, before the official production.

 the equipment lubrication

1. Each class should be added to the oil hole oil twice, into the bottle screw mechanism should be injected with butter (Note: oil hole in the guide plate below).

2. Often observe the lubrication of the rotating gear, timely injection of lubricants.

rinsing machine