You are here: Home » Products » water treatment system » membrane element » water treatment RO Membrane Elements-LE series

water treatment RO Membrane Elements-LE series

Share to:

LE series has low energy consumption, including 8-inch membrane elements and 4 inches membrane element which is divided into high desalination, high flux series. LE type series membrane element can effectively reduce the system pressure, save energy consumption and reduce running cost on the basis of ensuring water rate and desalting rate.

  • LE-Series
  • SAPSTONE
Quantity:

LE Series RO Membrane Elements

Sapstone industrial RO membrane element LE series has low energy consumption, including 8-inch membrane elements and 4 inches membrane element which is divided into high desalination, high flux series. LE type series membrane element can effectively reduce the system pressure, save energy consumption and reduce running cost on the basis of ensuring water rate and desalting rate.

The membrane element applies to surface water, groundwater whose salt content is under 2000 parts per million, and some low pollution water after desalination processing. It also applies to replace the old system, secondary depth advanced treatment and water desalination from water with low salinity, etc. It is currently widely applied in municipal landscape and agricultural irrigation, drinking water of municipal water supply and drainage, water treatment, hospital/medical industry boiler make-up water, pure water, food processing and pharmaceutical manufacturing industry, laboratory pure water equipment, and other fields.

 

Specification and Main Performance of RO Membrane Elements

Type

Model

Performance

Structural Parameters

Stable Rejection

/ %

Average permeate flux

/ gpd (m3/d)

Effective membrane area

/ ft2

Flowpath width

/ mil

Pipe diameter

/ mm

LE Series

LE-8040

99.0

1100041.6

380

31

28.7

LE-8040-400

99.0

1250047.4

400

30

28.7

LE-4040

99.0

2500 9.5

90

31

19.0

LE-4040-HR

99.5

2300 8.7

90

31

19.0

LE-4021

99.0

1000 3.8

38

31

19.0

Testing Conditions:   


Testing Pressure

150 psi1.03 MPa

Temperature of Testing Solution

25 

Testing ConcentrationNaCl

1500 mg/L

pH Value of Testing Solution

7.5

Recovery of Single Membrane Element

20%

Operation Limits and Conditions:


Max. Working Pressure

600 psi4.14 MPa

Max. Feedwater Flow

6 gpm1.36 m3/h

Max. Inflow Temperature

45 

Max. Inflow SDI15

5

Residual Chlorine Concentration of Feedwater

0.1 mg/L

pH Range of FeedwaterDuring Continuous Operation

310

pH Range of FeedwaterDuring Chemical Cleaning

212

Max Pressure Drop of Single Membrane Element

15 psi0.1 MPa)


CONTACT US

ZHANGJIAGNG Glory machinery Co., Ltd. locates in Zhangjiagang,our concept four good ,good person ,good machine,good service ,good price.

QUICK LINK

CONTACT INFO

 Tel: +86-17306160060
 E-mail: maria@glory-machinery.com
 Phone:+86-15962351220
 Add: by wukesong road of jinfeng town ,zhangjiagang city ,jiangsu province ,China 

SUBSCRIBE

Be the first to know about our lastest products.
Copyright 2017 Glory machinery Co., Ltd. All rights reserved. Designed by iwonder.cn      Site Map